Hallo guy's, berikut command CLI yang bisa digunakan untuk config Storage HP P2000.
Untuk aksesnya bisa menggunakan SSH, Telnet, via console, HTTP / HTTPS.
Untuk user access defaultnya seperti dibawah ini;
Username
|
Password
|
Roles
|
monitor
|
!monitor
|
Monitor (view only)
|
manage
|
!manage
|
Monitor, Manage (view and change)
|
# clear disk-metadata
Biasanya digunakan saat status disk LEFTOVR karena ada mengalami amber
# show disks
Location ... How Used ...
----------------------...
- 1.1 ... LEFTOVR ...
- 1.2 ... VDISK ...
- Clear metadata from a leftover disk:
# clear disk-metadata 1.1
Info: Updating disk list...
Info: Disk disk_1.1 metadata was cleared. (2012-01-18 10:35:39)
Success: Command completed successfully. - Metadata was cleared. (2012-01-18 10:35:39)
# clear events
Biasanya digunakan saat menghilangkan event log yang terjadi pada controler A/B
clear events [a|b|both]
a|b|both
Clear the event log for controller A:
# clear events a
Success: Command completed successfully. - The event log was successfully
cleared. (2012-01-18 10:40:13)
# restart
Digunakan untuk merestart
sc|mc
The controller to restart:
• sc: Storage Controller
• mc: Management Controller
Restart the Management Controller in controller A, which you are logged in to:
# restart mc a
During the restart process you will briefly lose communication with
the specified Management Controller(s).
Continue? yes
Info: Restarting the local MC (A)...
Success: Command completed successfully. (2012-01-21 11:38:47)
From controller A, restart the Storage Controller in controller B:
# restart sc b
Success: Command completed successfully. - SC B was restarted. (2012-01-21
11:42:10)
Tunggu Update selanjutnya ya...hehehhe..
0 comments:
Post a Comment